High-precision One-dimensional Portable Gaussmeter
Introduction
Dexinmag has developed a Hall sensor specifically for magnetic field measurement, featuring an ultra-compact active area (0.028 mm), an exceptionally wide operating temperature range (3K–500K), high linearity (±0.03%), high sensitivity (1 mG), and a broad measurement range (±50 T). The device incorporates professionally optimized hardware circuitry that fully unlocks the sensor's potential. Its digital section is powered by a high-performance 32-bit microcontroller based on the ARM Cortex architecture, ensuring superior processing power, efficient memory architecture, faster response times, and minimal measurement latency. The analog circuitry utilizes patented ULLASS (Ultra-Low-Loss Acquisition and Sampling System) technology, enabling high-quality capture of even the weakest signals. An ultra-high-definition, large-format display renders data with precise color accuracy and a wide viewing angle, remaining clearly legible even under intense ambient light or in complex operating environments. The intuitive touchscreen interface ensures a seamless user experience; functions can be configured and data retrieved with a simple tap, eliminating the need for cumbersome physical buttons. The product complies with international standards, including ISO9001, CE, and IQNet certifications.
The DX-600 portable 1D Gaussmeter supports a variety of probes with different package types and temperature ranges, catering to diverse measurement requirements. Every probe is rigorously calibrated in strict accordance with the JJF1832-2020 calibration specification for magnetometers (covering the 1 mT to 2.5 T range).
Feature
| Capacitive touchscreen with adjustable backlight | AC/DC magnetic field measurement | Orthogonality correction algorithm |
| 5 ¾-digit reading resolution | Intelligent range switching | FFT analysis |
| Bluetooth BLE (10Hz) support | Intelligent probe recognition | High-speed/low-speed switching |
| Measured values and curve display | Spherical coordinate display | Analog output |
| Extreme/maximum display and peak hold | Ultra-low noise | Threshold detection |
| Data storage, callback, and export | USB-C data communication | General instruction set (supports LabVIEW) |
Technical parameters
|
Total Range |
±500kGs(50T) |
||||
|
Test Dimensions |
One-dimensional |
||||
|
Measurement Method |
Auto (automatic range switching) / Manual |
||||
|
Range (mT) |
30 |
300 | 3000 | 30000 | 50000 |
|
Resolution (DC) |
0.0001mT |
0.001mT | 0.01mT | 0.1mT | 0.1mT |
|
Resolution (AC) |
0.1Gs/10μT |
||||
|
Accuracy |
DC - One-dimensional - ±0.1% ±0.005% range of reading (0.01-0.05T); |
||||
|
AC bandwidth |
50K |
||||
|
Probe temperature coefficient |
-(0.02% ±1 count)/ ºC |
||||
|
Probe temperature compensation coefficient |
-(0.007% ±1 count)/ ºC |
||||
|
Unit conversion |
1T=1000mT,1mT=1000μT ,1Gs=1Oe,1mT=10Gs,1Gs=79.8A/m |
||||
|
Dimensions |
187*82*28(mm) |
||||
|
Weight |
362.8g |
||||
|
Color scheme |
Obsidian Black |
||||
General specification
| Analog Interface | BNC-±3V |
| Communication Interface | TYPE-C |
| Power Supply | Two 18650 batteries in parallel |
| Power Consumption | 4.2W |
| Continuous Operation | 5 hours |
| Adaptor Probe | 1D (room temperature, high temperature, low temperature, high and low temperature) |
| Other Communication Methods | Bluetooth BLE communication (10Hz) |
Interface

|
No. |
Notes |
|
1 |
Analog signal output |
|
2 |
Sensor input interface |
|
3 |
Power button |
|
4 |
Type-C interface |
Function Introduction
|
|
|
|
|
Magnetic Field Measurement
Touch buttons include: zeroing, AC/DC switching, unit switching, range switching, data saving, maximum and minimum value display, screen hold, and menu. |
Menu Settings
The menu interface includes threshold settings, version information viewing, curve viewing, communication settings, device settings, calibration, and save/view. The curve function includes time-domain plot display, peak detection, and FFT spectrum display. |
Threshold Settings
Threshold settings allow you to set one-dimensional alarm thresholds. When the collected value exceeds the set threshold, the device will issue an alarm. Units: mT, Gs. Threshold settings can be entered via numeric keypad. Alarm Modes: None, Within Range, Outside Range. |
|
|
|
|
|
Curve Display
The curve displays a one-dimensional time-domain curve, and you can choose to display the curve for a specific axis individually. Below the curve, the current measurement value, maximum value, and minimum value are displayed. |
Device Settings
Time Settings: Set year, month, day, hour, and minute. Backlight Adjustment: Select between always on or automatic screen-off mode. Screen Brightness Adjustment. Buzzer On/Off. Language Settings. Filtering Method: Average Filter, Sliding Filter, None. |
Data Saving
Saving Mode: Single or Continuous. Data Callback Viewing |
|
|
||
|
FFT Spectrum The FFT measurement frequency range is 0–2048 Hz, displaying the peak value and its corresponding frequency. |
|
|
Data reading software

The host computer data reading software features recording and plotting functions, automatic probe calibration/host automatic memory operation mode, automatic zero point, automatic range, threshold setting and alarm, self-setting time and brightness, and selectable display units such as milligauss and nanotesla, among many other intelligent functions.
(1) Users can use a computer to read test data and draw various measurement graphs using professional plotting software. Graphs can be sent and printed.
(2) Real-time data can be monitored on the computer using the serial port real-time transmission function.
(3) Real-time data can be queried using a fixed instruction set.
Adapted probe
High-precision transverse probe

*Length can be customized upon request
*Temperature sensors can be integrated into the probe
*Probes can be configured into arrays
|
NO. |
L (cm) |
T(mm) max |
W (mm) |
A (mm) |
Dia. of active area(mm) |
Frequency range |
Full range |
Accuracy (linearity) |
Working temperature zone |
Zero field temperature coefficient (max) |
Temperature coefficient (max) |
Packaging materials |
|
CDX800F |
6/8/10 |
1.00 |
2.6 |
1±0.1 |
0.15 |
DC-1kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Brass |
|
CDX801F |
6/8/10 |
0.80 |
2.2 |
1±0.1 |
0.15 |
DC-1kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Brass |
|
CDX802F |
6/8/10 |
0.60 |
1.7 |
1±0.1 |
0.15 |
DC-1kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Brass |
|
MDX801F |
6/8/10 |
0.50 |
1.6 |
1±0.1 |
0.15 |
DC-1kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Brass |
|
MDX802F |
6/8/10 |
0.50 |
1.2 |
1±0.1 |
0.15 |
DC-1kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Brass |
|
MDX803F (Flexible) |
6/8/10 |
0.35 |
1.2/0.8 |
0.2±0.05 |
0.15 |
DC-50kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Resin |
|
MMDX804F (Flexible) |
6/8/10 |
0.25 |
1.2 |
0.2±0.05 |
0.10 |
DC-50kHz |
300kGs |
±0.02% ~30kGs |
-10℃ ~ +75℃ |
±0.08 G/℃ |
±0.02%/℃ |
Resin |
|
MMDX805F (Flexible) |
6/8/10 |
0.25 |
0.8 |
0.2±0.05 |
0.05 |
DC-50kHz |
300kGs |
±0.02% ~20kGs |
-10℃ ~ +75℃ |
±0.11 G/℃ |
±0.02%/℃ |
Resin |
*Note: The red one is the standard probe
More options:






